Next Generation Disinfecting & Sanitizing Technology

FOR ANTIMICRIOBIAL CONTROL IN HVAC SYSTEMS AND AIR DUCTS (INCLUDING ODOR CAUSING BACTERIA). IT IS A VIOLATION OF FEDERAL LAW TO USE THIS PRODUCT IN A MANNER INCONSISTENT WITH ITS LABELING THE PERSON APPLYING THIS PRODUCT IS RESPONSIBLE FOR FOLLOWING THESE DIRECTIONS UNDER BOTH STATE AND FEDERAL LAWS.

If you need help in understanding any part of these instructions or have additional questions after reading these instructions, DO NOT APPLY THIS PRODUCT until you have received the answers for all of your questions.

General Directions for PRODUCT Usage

PRODUCT effectively controls by inhibiting growth of odor causing bacteria, fungi, and other odor, stain or damage causing organisms in HVAC system components and air ducts in residential, commercial, institutional, and industrial buildings. PRODUCT also eliminates odors associated with bacteria, smoke, animals, cooking, spoilage, musty and other

odors and removes odor-causing organisms when used as part of such a comprehensive preventative maintenance program in HVAC systems and air ducts. PRODUCT is a bacteriostat, fungistat, and deodorizer for use in residential, commercial and industrial settings. It will not stain or bleach materials or fabrics and will not harm or damage HVAC system components.

PRODUCT is formulated for use in all kinds of HVAC components and air ducts including:

Furnaces

Air Handlers

Packaged units

including Rooftops and Packaged Terminal Air Conditioner (PTAC) units

Fan coil units

Air distribution

Mixing boxes

Transfer boxes

Transitions

Turning vanes

Dampers

Fans and fan housings, and associated components:

  • Condensate drain pans,
  • Unlined sheet metal ducts,
  • Air supply and return ducts and plenums fabricated with plywood,
  • OSB or other wood like material,
  • Flexible air ducts fabricated of metal or plastic,
  • Humidifiers,
  • Dehumidifiers; both Desiccant and Refrigerated,
  • Registers,
  • Grills and other air intake and discharge devices

Follow the directions below for the specific type of duct or component being treated. It is vital that the following directions be carefully read and understood prior to using the Product.

HVAC Application Instructions:

Wet the surfaces with the spray, giving special attention to cracks and crevices. [Product] will not stain any materials not stained by water] we suggest testing for compatibility on surface of concern first. Allow ten to twenty minutes for drying. No rinsing or wiping is required.
Following the elapsed drying time it is best practice to purge the system, by increasing the negative pressure through the outdoor exhaust or negative air machine or by turning on the vacuum used to preclean the HVAC system, while removing the duct openings seals. This will minimize the release of scent into the spaces served by the system.

Application Equipment and Devices:

Refer to the precautionary statements for the Personal Protective Clothing and other special instructions that must be followed.

Deodorize HVAC System Ductwork

(non-pathogenic organisms only)

Spray product into system intake vents while system fan is running. Allow enough spray time for product to contact air duct system surfaces, repeat application if necessary.

Before creating a program for use or for any additional information or clarification,
please contact MPI at 1-310-684-3839 to discuss the specific application and situation.